AFS-MDA-C5
Marine Diesel Additive

L10 Superior Performance:

  • Keeps injectors clean and maintains optimum engine performance. Meets both the NCWM & EMA/TMC Premium Diesel criteria for detergency.
  • Removes and prevents deposits which can deteriorate fuel economy and emissions.
  • Improved fuel economy up to +6%.

    Thermal Stability:
    • Increases the thermal stability of fuels. Meets or exceeds both the NCWM & EMA/TMC Premium Diesel criteria for thermal stability.
    • Reduces sludge formation that plugs fuel filters, injector deposits, smoke and damage to fuel injectors.
    Water Control System:
    • Demulsifier to prevent fuel/water emulsion and drop excessive water out of solution.
    • Water dispersant to help safely remove water on a gradual basis.
    Lubricity Properties:
    • Protects all diesel fuel-injection systems, reduces pump and injector wear. Meets or exceeds EMA/TMC Premium Diesel criteria for lubricity.
    Corrosion Protection:
    • Meets or exceeds EMA/TMC Premium Diesel criteria for corrosion.
    Cetane Improver:
    • Increases cetane five (5) numbers.
    • Enhances cold starts, reduces misfiring, white smoke, noise and warm-up.

    Typical Physical Properties

    Specific Gravity @ 15.6°C (60F) 0.925
    Density per U.S. Gallon @15.6°C 7.70 lbs
    Appearance Amber Liquid
    Flash Point (PMCC) 155°F
    Pour Point -60°F
    Viscosity @ 40°C 4.2
    Typical Treat Rate
    1 gallon: 1000 gallons
    Special Handling Instructions:
    Keep away from potential sources of ignition. Store open container in well ventilated area. Avoid breathing vapors. Keep containers closed when not in use. Empty containers retain material residue. Do not cut, weld, braze, solder drill, grind or expose containers to heat, flame, spark or other sources of ignition. Read the M.S.D.S. for additional safety and handling information.